From what I know of POR-15. It is rather simple to work with. You must cleanoff therust first, wire brush, sandblast, what ever it takes. then spray the por-15 on then apply some paint then undercoating to protect the frame. I have to do this to mine because my clutch slave cylinder is leaking and peeling the paint off the frame. Nasty stuff that Dot-4. Well good luck!
From: DMCVegas@xxxx Reply-To: dmcnews@xxxxxxxxxxxxxxx To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] Rust Problem. Date: Mon, 28 May 2001 19:48:32 -0000
In January I had my entire clutch system replaced. One component was a defective clutch master cylinder that leaked DOT-4 onto my chassis.
Back to the Home of PROJECT VIXEN