Re: [DML] Water Temp. & Fans

["AGUSTIN TINOCO" <atdmc@xxxx>]

EDITOR's NOTE: I have trimmed down the amount of quoted material. When
submitting postings, please prudently trim quoted material to reduce
unneeded bulk.


what is the procedure to bleed the air out of the coolant lines, any body 
can help me?


> From: "DMC Joe" <dmcjoe@xxxx>
> Reply-To: dmcnews@xxxxxxxxxxx
> To: <dmcnews@xxxxxxxxxxx>
> Subject: Re: [DML] Water Temp. & Fans
> Date: Mon, 10 Jul 2000 00:50:46 -0400
>
> The fans should turn on at approximately 207 degrees F. Your problem may be
> caused by trapped air in the coolant lines. You will need to air bleed your
> cooling system or better yet you may want to install an Overheat Protector.
> You should also check to be sure that your car is not equipped with the
> factory installed Fan Fail Module or 35 amp circuit breaker. Both of these
> items have an extremely high failure rate.
>
> "We're here to help you"
>
> DMC Help / De Lorean Services / <dmchelp@xxxx>
> Web Site: <www.deloreanservices.com>
> .