[DML] Re: No turn signals

["DMC Joe" <dmcjoe@xxxx>]

Be aware that the turn signals are wired through the hazard flasher switch.
If the hazard switch contacts or dirty or loose the directional signal
circuit will be affected.

DMC Joe / De Lorean Services / <dmcjoe@xxxx>

Web Site: <http://www.deloreanservices.com>
----- Original Message -----
From: Ann & Ed Thompson <RappaRivaRat@xxxx>
To: <dmcnews@xxxxxxxxxxx>; yugoman <mdrig@xxxx>
Sent: Tuesday, February 15, 2000 12:23 PM
Subject: [DML] Re: No turn signals


> > yugoman wrote:
> >
> > My turn signals have quit working on my 81, #2423. I checked the fuse,
and
> > it looks like according to the fuse cover to be on the same fuse with
the
> > taillights. The brake lioghts are working however, just no turn
signals. Any
> > idea where I should check?
>
>
> Sounds like the turn signal flasher to me. How about the emergency
flashers?
> Do they work? Check both front and rear. If so, it most certainly is the
turn
> signal flasher.
>
> Regards,
> Ed Thompson (#6419 since 1982)
> Midlothian, VA