[DML] Re: Power Windows & Parking brake

[Carrie Huggins <clh168@xxxx>]

If you choose to open up your door compartment understand that there are
many small parts that need to placed in exactly the same way you removed
them. you have to go through door lock rods to get to the window track and
its very easy to break the glass so be careful. Its hard to see but if you
look carefully you will see how the window operates and can pretty much
figure it out for yourself. 

As for your brake problem, if you remove your wheels you can see your
adjustment right above the main brake caliper. Adjustments can be made
accordingly with simple tools. As you pointed out, check your pads.



At 06:58 PM 12/12/99 -0600, you wrote:
>I'm trying to see what I can do to fix my drivers side power window. It is
>completely off the track, and I don't see the motor doing anything to
>raise or lower the window. The motor does however hum. I can't figgure out
>how to get a good look at the regulator and track to figure out what the
>problem is. After I got the upper and lower trim off I got stuck. Is there
>a way I can get more access? Anyone know what I should be looking for once
>I get in there?
>
>Secondly, on the only other D that I've got to play with I seem to
>remember that the parking break could be pulled to a 90 degree angle. On
>my car it seems to only go to abot a 45 degrees. It also doesn't hold for
>anything, but I think that's just a break pad problem. I was just curious
>as to which car was correct, and if it's supposed to be able to go to 90
>what my problem could be. 
>
>--
>Jonathan 
>
>
>
>------------------------------------------------------------------------
>Before posting messages or replies, see the posting policy rules at:
>www.dmcnews.com/Admin/rules.html
>
>To address comments privately to the moderating team, please address:
>moderator@xxxx
>
>------------------------------------------------------------------------
>-- 20 megs of disk space in your group's Document Vault
>-- http://www.egroups.com/docvault/dmcnews/?m=1
>
>
>
>