[DML] Re: HELP: Angle Drive Installation
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: HELP: Angle Drive Installation





Dick,
I had navigateed to the Tech Section before but cannot locate it now.
I seem to remember that it was under Files.
Thanks,
Bill 
I will not be able to log on for a few days - traveling.


--- In dmcnews@xxxxxxxxxxxxxxx, Dick Ryan <deloreanbiker@xxxx> wrote:
> 
> Check the DMC News Tech Section under Angle Drive
> Removal for Dummies (nothing personal).
> 
> Dick Ryan
> VIN 16867
> 
> 
>  <billeg1983@xxxx> wrote:
> > > 
> > > 
> > > 1. Instructions for replacement angle drive state
> > that the wheel 
> > > spindle nut is a 32mm and angle drive is 1.25
> > (inch). What are the 
> > > correct sizes (38mm socket and 1.50 open end)?
> > > 2. Any suggestions on replacing the angle drive.








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated