[DML] Re: What is it?

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

That is the wire connecting the O2 sensor. If the wire is too short
the emergency brake cable will hit it and knock it loose. Cut the wire
tie inside the frame and stretch the wire out and route it so it
doesn't get hit by the cable.  Clean the connecting ends up before
reconnecting. The connections should be clean, this is a very low
voltage circuit and any dirt (resistance) will affect it.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "spaceace3113" <spaceace3113@xxxx> wrote:
> 
> 
>  With the driver's rear tire off my car we noticed a wire off a 
> sensor that exited the tire flare in the wheel well. I reconnected 
> it but, what was it? I havent had the chance to look it up yet but 
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/