RE: [DML] Fan Speed 2 = nothing
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Fan Speed 2 = nothing




Greg, If the resistor wasn't burned out or a bad connection or wire, then
the switch must be the problem. There isn't anything else between the motor
and the power.
John Hervey
www.specialtauto.com



-----Original Message-----
From: gzapf [mailto:x86Daddy@xxxxxxxxxxxxx]
Sent: Sunday, November 14, 2004 10:17 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Fan Speed 2 = nothing



> When I turn on my AC, fans, etc...  to fan speed 1, 3, and 4, I get
> normal behavior.  When I try fan speed 2, it actually turns off.  When
> I asked about this recently, I received several suggestions to check
> out the resistor in the passenger footwell.  Mine was very rusted, so
> I installed a new one.  Unfortunately, I get the same behavior.  Does
> anyone have other ideas on the possible cause of this?
> 
> Thanks,
> --Greg
> #2894





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated