[DML] Re: Trailing arm bolt question

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

When you have a problem with an item you purchesed form a vender
generally the first step is to contact them. I am sure if you did Toby
would give you the whole procedure. A shortened version follows:
Raise car. Remove the bolts holding the LEFT SIDE trailing arm to the
rear carrier and the trailing arm bolt. You do not need to remove or
disconnect the brake line, just move the trailing arm enough to get
out of the way. BTW only tighten the trailing arm bolt WITH THE WEIGHT
OF THE CAR ON THE SUSPENSION!!!! Doing it any other way preloads the
bushings and will cause early failure.
David Teitelbaum
vin 10757


-- In dmcnews@xxxxxxxxxxxxxxx, "sweitzel_2000" <sweitzel@xxxx> wrote:
> I bought a set of Toby TAB's and am planning to install them very 
> soon. Tonight I was under the car and realized that I need some 
> clarification.



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/