[DML] Re: Another... Cold Start Problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Another... Cold Start Problem



Harold, 
Thanks, I will check those wires and switch.

David T, 
I get the same problem with no humidity or high humidity. It really depends on
how long the car has sat without being ran. I know I need a possible valve
adjustment on the 4,5,6 side. Checking the plugs for wear is on my to-do list.
They were installed last May and have just under 17k miles on them along with the
wires, cap, rotor & O2 sensor. Air filter was changed just before Pigeon Forge.

Shannon Y
16506
------------------------
------------------------
Sounds like the thermo-time switch mounted on the waterpump is not functioning
or, the wires are not connected well at the switch. Since the wire switch thing
worked for you the cold-start valve is apparently working ok.

Harold McElraft - 3354
------------------------
------------------------
Was the humidity really high? It sounds like you need a tune-up replacing the
cap, rotor, ignition wires, and spark plugs. Under high humidity conditions the
secondary ignition system breaks down and the spark doesn't get to the worn spark
plugs. Once you get the motor a little warm it is fine. To complete the tune-up
you should also replace the air filter, the O2 sensor, clean the fuel injectors,
and adjust the valves. You should make sure all the engine systems are
functioning, check the timing, and no vacuum leaks. Don't touch the mixture
screw. If it was properly set in the first place it should not need to be
touched.
David teitelbaum
vin 10757



		
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated