Re: [DML] clicking/squeek (speedo diagnosis)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] clicking/squeek (speedo diagnosis)



In a message dated 5/3/04 4:35:09 PM Central Daylight Time, 
edgarbade@xxxxxxxxxxx writes:


> Andy,
> Well I guess luck was with me.  I jacked up the car, turned the wheel, and
> looked under the dash.  Guess what I found.  The lower cable had come loose
> and fallen off.
> 
> So I oiled the cable and re-attached it.  Now it appears to be working but
> will test it tomorrow.
> 
> Thanks for the help.
> 
> Ed

Ed,

where did the cable come off? i assume the angle drive side.  you may want to 
check to make sure the threads aren't stripped on the fitting and you should 
also install the lower cable bracket that holds the cable away from the wheel 
and keeps it from getting kinked during wheel-locked turns.

Good luck!
Andy


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated