RE: [DML] Top end restoration and comparison photo preview

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Scott, I use a 500 degree clear coat from Pep Boy's. It seems to hold up to
chemicals good and soaks into the metal if prepared properly. Temperature
and humidity have a large part to do with the out come of the part your
spraying and the paint holding on to. I have tried the VHT 1200 degree, but
I wind up waiting more because of the spray doesn't seem to want to work and
anything that gets over 500 degree had better be only the exhaust.
John Hervey
www.specialtauto.com



-----Original Message-----
From: Scott Mueller [mailto:scott.a.mueller@xxxxxxxxx]
Subject: RE: [DML] Top end restoration and comparison photo preview


I like to look of the bead blasted and clear coated aluminum parts.

What kind of clear coat did you use?

Enamel, urethane, lacquer, powder coating?



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/