[DMCForum] roof support.. was: Tampa tech session

["timnagin" <timnagin@xxxxxxxxxxxxxx>]

What exactly is Walter's procedure?  I recently saw a car with, I think,
four small pop-rivets across the top of the rear piece.  They didn't really
look large enough to do anything.

Another owner and I were discussing drilling all the way through the rear
support, through the fiberglass underbody, and install bolts.  I know about
the interference issues with the T-panel and headliner.  Mine isn't lifting
right now, and has tons of resin all over the place, but I am considering
doing this while I am in there.

What do you think?

Greg



-----Original Message-----
From: Jack Stiefel [mailto:jackstiefel@xxxxxxxxxxxxxxxxxxx]
Sent: Sunday, October 24, 2004 8:34 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] Re: Tampa tech session



I have a non working drivers side window and I believe I need the top of
the t-panel lowered and screwed down per Walters directions.  I am not
sure if those little projects can be done in conjunction with other
projects.

Jack

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.